Industrial Pressure Washer: Pressure Washing In Cold Weather

All seasoned commercial pressure washers realize that ice might be deadly for an industrial pressure washer. Consider that water enlarges 9% when it freezes. This implies that if you leave water in your pressure washer on a freezing spell, you would likely break internal parts. Read on to discover ways to prepare an industrial pressure washer for chilly temperatures. You will also find the coldest temperatures at which crate washer needs to be used.

1. DON’T ALLOW your gear to freeze.

When freezing temperatures come in the outlook, it’s time to maneuver your power washing gear to a warm, dry area. In case the washer is in a constricted space, including a van, you might need to transfer a heater indoors to keep it warm immediately. In a crunch, a 500-watt halogen bulb could possibly be aimed in the pump to stop freezing. For those who don’t have any place to maintain your machine warm, you are able to either always run warm water through it, or cover it using a tarp and expectation for the most effective.

2. An antifreeze flush is the perfect means to shield it.

Ideally, you will have a lot of warning time before chilly temperatures reach. If so, washing out your pressure washing gear with antifreeze is the most effective solution to go. Simply be certain the car or RV antifreeze you are using is rated to the best common temperatures for your area.

To flush antifreeze throughout your machine, begin by pouring antifreeze to the float tank. Activate the industrial pressure washer to send the antifreeze through the device. To defend the coils, pump, and pipes, take away the spray tip off and then put the wand in the float tank. To send antifreeze through the unloader bypass line, pump the trigger for a few minutes, activating and releasing the machine. Lastly, in case your pressure washing equipment is compatible with chemical cleaners, you will need to send antifreeze through the chemical line hose individually. It needs to be possible to catch and reuse the exact same five gallons of antifreeze throughout this process. On the off chance that the pressure washing gear lacks a float tank, just make use of a five-gallon pail instead; this is actually the pool that’ll feed the water intake hose.